User`s guide

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Guide
11-15
Resetting and Disabling IPX
To return IPX settings to their defaults and disable IPX functions, use
the commands listed in Table 11-7.
Table 11-7
IPX Reset and Disable Commands
Command Description
disable type20 forwarding {vlan <name>} Disables the forwarding of IPX type 20 packets.
disable ipxrip Disables IPX/RIP on the router.
disable ipxsap Disables IPX/SAP on the router.
disable ipxsap gns-reply {vlan <name>} Disables GNS reply on one or all IPX interfaces.
unconfig vlan <name> xnetid Removes the IPX NetID of a VLAN.
unconfig ipxrip {vlan <name>} Resets the IPX/RIP settings on one or all VLANs to
the default. Removes import and export filters,
and resets the MTU size, update interval, and
inter-packet delay.
unconfig ipxsap {vlan <name>} Resets the IPX/SAP settings on one or all VLANs to
the default. Removes import and export filters,
and resets the MTU size, update interval, and
inter-packet delay.