User`s guide

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Guide
9-9
Route Redistribution
Both RIP and OSPF can be enabled simultaneously on the switch.
Route re-distribution allows the switch to exchange routes, including
static routes, between the two routing protocols. Figure 9-3 shows
an example of route re-distribution between an OSPF autonomous
system and a RIP autonomous system.
Figure 9-3
Route Redistribution
Note
Although OSPF and RIP can be run simultaneously on the switch, you
cannot apply them both to the same VLAN.
BD_016
OSPF AS
ABR
ASBR ASBR
RIP AS
LINK DISABLED
12345678
12345678
POWER
DIAG
234 567
1 8
GIGABIT ETHERNET SWITCH
ACTIVITY
LINK
1000BASE-X NETWORK PORTS
Area
121.2.3.4
Backbone Area
0.0.0.0
LINK ON
ACTIVITY
DISABLED
123456
789101112
13 14 15 16 17 18
19 20 21 22 23 24
POWER
MGMT.
10/100BASE-T ETHERNET SWITCH
WITH GIGABIT ETHERNET
49
49
49R
49R
A
L
25 26 27 28 29 30
31 32 33 34 35 36
37 38 39 49 41 42
43 44 45 46 47 48
50
50
50R
50R
A
L
1234
13 14 15 16
25 26 27 28
37 38 39 40
5678
17 18 19 20
29 30 31 32
41 42 43 44
9101112
21 22 23 24
33 34 35 36
45 46 47 48
49 49R
50 50R
1000BASE-X
10/100BASE-TX
MDI-X
LINK ON
ACTIVITY
DISABLED
123456
7 8 9 10 11 12
13 14 15 16 17 18
19 20 21 22 23 24
POWER
MGMT.
10/100BASE-T ETHERNET SWITCH
WITH GIGABIT ETHERNET
49
49
49R
49R
A
L
25 26 27 28 29 30
31 32 33 34 35 36
37 38 39 49 41 42
43 44 45 46 47 48
50
50
50R
50R
A
L
1234
13 14 15 16
25 26 27 28
37 38 39 40
5678
17 18 19 20
29 30 31 32
41 42 43 44
9101112
21 22 23 24
33 34 35 36
45 46 47 48
49 49R
50 50R
1000BASE-X
10/100BASE-TX
MDI-X