User`s guide

Displaying Router Settings
8-24
Displaying Router Settings
To display settings for various IP routing components, use the
commands listed in Table 8-6.
Table 8-6
Router Show Command
Command Description
show iparp proxy {<ipaddress> {<mask>}} Displays the proxy ARP table.
show ipconfig {vlan <name>} Displays configuration information for one or all
VLANs.
show ipqos {<ip_destination_address>
<mask>}
Displays the IP QoS table.
show ipstats {vlan <name>} Displays IP statistics for the CPU of the system.
show iparp {<ipaddress | vlan <name> |
permanent}
Displays the IP Address Resolution Protocol
(ARP) table. You can filter the display by IP
address, VLAN, or permanent entries.
show ipfdb {<ipaddress> <netmask> | vlan
<name> }
Displays the contents of the IP forwarding
database (FDB) table. Used for technical support
purposes. If no option is specified, all IP FDB
entries are displayed.
show iproute {priority | vlan <name> |
permanent | <ipaddress> <mask>}
Displays the contents of the IP routing table.