User`s guide

ManualsBrandsAllied Telesyn International Corp ManualsComputer equipmentAT-8324SX

Web-based Management

Address Table Configuration

The Address Table contains the unicast MAC addresses and VLAN

identifier associated with each port (that is, the source port associated

with the address and VLAN). You can also clear the entire address table,

or information associated with a specific port, address, or VLAN

identifier; or set the aging time for deleting inactive entries. The

information displayed in the Address Table is indicated in the following

figure and table.

Aging Time (10-415):

Dynamic Address Counts:

Static Address Counts:

<<Add

Remove

Clear Table

Address

Address Table Sort Key:

300

seconds

115

000024-B32883, VLAN 1, Unit 1, Port 7, Dynamic

0000E2-12F9F8, VLAN 1, Unit 1, Port 7, Dynamic

0000E2-20C3D5, VLAN 1, Unit 1, Port 7, Dynamic

0000E2-16C582, VLAN 1, Unit 1, Port 7, Dynamic

0000E2-000678, VLAN 1, Unit 1, Port 7, Dynamic

0000E2-2174D0, VLAN 1, Unit 1, Port 7, Dynamic

0000E8-008907, VLAN 1, Unit 1, Port 7, Dynamic

0000E8-B235D5, VLAN 1, Unit 1, Port 7, Dynamic

0000E8-1012D5, VLAN 1, Unit 1, Port 7, Dynamic

0000E8-B21002, VLAN 1, Unit 1, Port 7, Dynamic

0000E8-24C346, VLAN 1, Unit 1, Port 7, Dynamic

MAC

Address

VLAN

(1-2048)

Unit

Port

Parameter Description

Aging Time Time-out period in seconds for aging out dynamically learned

forwarding information. The range is 10 - 415 seconds; and the

default is 300 seconds.

Dynamic Address Count The number of dynamically learned addresses.

Static Address Count The number of statistically configured addresses

Address Table Sort Key The system displays the MAC address of each node, the switch unit

and the port whose address table includes this MAC address, the

associated VLAN(s), and the address status (i.e., dynamic or static)

Address Table All entries, sorted by address or VLAN ID.

New Static Address Use these fields to add or remove a static entry to the address

table. Indicate the address, stack unit, port and VLAN group when

adding a new entry.

Add/Remove Adds/removes selected address.

Clear Table Removes all addresses from the address table.