User`s guide

AT-S29 Management Software User’s Guide
79
System Information
Use the System Information screen to display descriptive information
about the switch, or for quick system identification as shown in the
following figure and table.
Menu Description
System Name
1
1. Maximum string length is 45 characters.
Name assigned to the switch system
IP Address
2
2. The default value is 0.0.0.0.
IP address of the agent you are managing. The
agent module supports SNMP over UDP/IP
transport protocol. In this environment, all
systems on the Internet, such as network
interconnection devices and any PC accessing
the agent module are assigned an IP address.
Valid IP addresses consist of four numbers, of 0 to
255, and separated by periods. Anything outside
of this format will not be accepted by the
configuration program.
Object ID MIB II object identifier for switch’s network
management subsystem (AT-8324SX:
1.3.6.1.4.207.1.4.42).
Location
1
Specifies the area or location where the system
resides.
Contact
1
Contact person for the system.
System Uptime Length of time the current management agent
has been running. (Note that the first value is
1/100 seconds.)
System Name
CentreCOM AT-8324SX
IP Address
Object ID
Location
Contact
System Up Time
1.0.1.0.1
1.3.6.1.4.207.1.4.42
Leslie extension 613
Development
41 d 2 h 11 min 48 s