User`s guide

AT-S29 Management Software User’s Guide
63
802.1Q VLAN Port Configuration
Use this screen to configure port-specific settings for IEEE 802.lQ VLAN
features.
Parameter Description
PVID The VLAN ID assigned to untagged frames received on this port. Use the
PVID to assign ports to the same untagged VLAN.
Acceptable Frame
Type
1
2
This switch accepts “All" frame types, including VLAN tagged or VLAN
untagged frames. Note that all VLAN untagged frames received on this
port are assigned to the PVID for this port.
Ingress Filtering
1
If set to "True," incoming frames for VLANs which do not include this port
in their member set will be discarded at the inbound port.
GVRP Status Enables or disables GVRP for this port. When disabled, any GVRP packets
received on this port will be discarded and no GVRP registrations will be
propagated from other ports.
Note that GVRP must be enabled for the switch before this setting can take
effect. (See Device Control Menu / Extended Bridge Configuration.)
GVRP Failed
Registrations
The total number of failed GVRP registrations, for any reason, on this port.
GVRP Last PDU
Origin
The Source MAC Address of the last GVRP message received on this port.
1. This control does not affect VLAN independent BPDU frames, such as GVRP or STP. However, it does affect VLAN dependent BPDU frames,
such as GMRP.
2. Not implemented in this firmware release.
802.lQ VLAN Port Configuration : Unit 1 Port 1 - 12
=================================================
Port PVID Acceptable Ingress GVRP GVRP Failed GVRP Last
Frame Type Filtering Status Registrations PDU Origin
--------------------------------------------------------------------
1 1 All FALSE DISABLED 000-00-00-00-00-00
2 1 All FALSE DISABLED 000-00-00-00-00-00
3 1 All FALSE DISABLED 000-00-00-00-00-00
4 1 All FALSE DISABLED 000-00-00-00-00-00
5 1 All FALSE DISABLED 000-00-00-00-00-00
6 1 All FALSE DISABLED 000-00-00-00-00-00
7 1 All FALSE DISABLED 000-00-00-00-00-00
8 1 All FALSE DISABLED 000-00-00-00-00-00
9 1 All FALSE DISABLED 000-00-00-00-00-00
101 All FALSE DISABLED 000-00-00-00-00-00
111 All FALSE DISABLED 000-00-00-00-00-00
121 All FALSE DTSABLED 000-00-00-00-00-00
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrow keys to move, <Space> to scroll options