User`s guide

AT-S29 Management Software User’s Guide

802.1Q VLAN Static Table Information

Use this screen to create a new VLAN or modify the settings for an

existing VLAN. You can add/delete port members for a VLAN from any

unit in the stack, or prevent a port from being automatically added to a

VLAN via the GVRP protocol. (Also, note that all ports can only belong to

one untagged VLAN. This is set to VLAN 1 by default, but can be changed

via the 802. 1 Q VLAN Port Configuration screen.)

Parameter Description

VID The ID for the VLAN currently displayed.

Range: 1-2048

VLAN Name A user-specified symbolic name for this VLAN.

String length: Up to 8 alphanumeric characters.

Status Sets the current editing status for this VLAN as:

Not in Service, Destroy, or Active.

Unit Stack unit.

Egress Ports Set the entry for any port in this field to "1" to add it to the displayed VLAN,

or "O” to remove it from the VLAN.

Forbidden Egress

Ports

Prevents a port from being automatically added to this VLAN via GVRP.

[Show] Displays settings for the specified VLAN.

[More] Displays consecutively numbered VLANS.

[New] Sets up the screen for configuring a new VLAN.

802.1Q VLAN Static Table Information

======================================

VID VLAN Name Status

--------------------------------------

Unit Egress Ports Forbidden Egress Ports

1. 111111111111 111111111111 1---000000000000 000000000000 0---

2. ------------ ------------ ---------------- ------------ ----

3. ------------ ------------ ---------------- ------------ ----

4. ------------ ------------ ---------------- ------------ ----

VID : 0

[Show]

[More]

[New]

Use <TAB> or arrows keys to move, other keys to make changes.

<Enter> to select.