User`s guide

Using the System Configuration Program
48
Displaying the Current STA for Ports or Modules
The parameters shown in the following figure and table are for port or
module STA Information (Port 1-12, Port 13-24, Expansion Slot 1 or
Expansion Slot 2).
Spanning Tree Information: Unit 1 Port 1-12
============================
Port Type Status Designated Designated Designated
Cost Bridge Port
------------------------------------------------------------
1. 10/100TX FORWARDING 0 128.0000f4123456 128.3
2. 10/100TX FORWARDING 19 32768.0000f4123457128.1
3. 10/100TX FORWARDING 19 32768.0000f4123458128.1
4. 10/100TX FORWARDING 19 32768.0000f4123459128.5
5. 10/100TX FORWARDING 19 32768.0000f412345a128.6
6. 10/100TX LISTENING 19 32768.0000f412345b128.3
7. 10/100TX LEARNING 19 32768.0000f4123456128.3
8. 10/100TX FORWARDING 19 32768.0000f4123457128.3
9. 10/100TX FORWARDING 19 32768.0000f4123458128.4
10.10/100TX FORWARDING 19 32768.0000f4123459128.5
11.10/100TX FORWARDING 19 32768.0000f4123459128.5
12.10/100TX FORWARDING 19 32768.0000f4123459128.5
<OK> <PREV Unit> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrows keys to move. <Enter> to select.