Installation guide

AT-8216FXL, AT-8224XL, and AT-8288XL Series Installation Guide
31
Reviewing Safety Precautions
Please review the following safety precautions before you begin to
install the switch in your network. Refer to Appendix D for translated
safety statements in your language.
Laser
Class 1 laser product.
"
6
Laser
Do not stare into the laser beam.
"
7
Warning
Electric Shock Hazard
: To prevent electric shock, do not remove
the cover. There are no user-serviceable parts inside. The unit
contains hazardous voltages and should only be opened by a
trained and qualified technician.
"
8
Warning
Lightening Danger
: Do not work on this equipment or cables
during periods of lightening activity.
"
9
Warning
Power cord is used as a disconnection device:
To de-energize
equipment, disconnect the power cord.
"
10
Warning
Electrical-Type Class 1 Equipment
: This equipment must be
earthed. The power plug must be connected to a properly wired
earth ground socket outlet. An improperly wired socket outlet
could place hazardous voltages on accessible metal parts.
"
11
Caution
Pluggable Equipment
: The socket outlet should be installed near
the equipment and should be easily accessible.
"
12
Caution
Air vents
: The air vents must not be blocked on the unit and must
have free access to the room ambient air for cooling
"
13
Caution
Operating Temperature
: This product is designed for a maximum
ambient temperature of 40°C.
"
14
Caution
All Countries
: Install this product in accordance with local and
National Electric Codes.
"
15