Technical data

Chapter 3 Open Issues 17
■ Change /opt/SUNWits/Graphics-sw/xil/man/man3
to /opt/SUNWrtvc/man/man3
■ Page 14
■ Change /etc/opt/SUNWrtvc/bin/rtvc-verify
to /opt/SUNWrtv/bin/rtvc-verify
■ Change /opt/SUNWits/Graphics-sw/xil/examples/test
to /opt/SUNWrtvc/examples/test
■ Page 19
■ Change /opt/SUNWits/Graphics-sw/xil/examples/test/SunVideo
to /opt/SUNWrtvc/examples/test/SunVideo
■ Page 33
■ Change /opt/SUNWits/Graphics-sw/xil/examples/rtvcdisplay
to /opt/SUNWrtvc/examples/rtvcdisplay
ISDN and ATM — Power Management Not
Supported (4046689)
ISDN and ATM do not currently support the Power Management suspend and
resume features. This is a known problem and is currently under investigation.
Solstice SyMON 1.4 — Config Reader Does Not
Handle Device Multipathing (4009934)
You can connect a Sun RSM Array 2000 (or SPARCstorage Array series device) to
your machine through two ports. By connecting the device through two ports, the
logical view creates two branches in the device tree for the same device. This may
give the impression that there are two different devices connected to your machine.
To verify that only one device is connected to your machine, refer to the workaround
below.
Workaround: Every device has a unique name. If the device name is the same for
each branch of the device tree, then only one device is connected to your machine.