User`s guide

AT-S39 User’s Guide
62
The Port Status window is displayed. Figure 13 is an example of
the window.
Figure 13 Port Status Window
The information in this window is for viewing purposes only. The
columns in the window are described below:
Prt
The port number.
Link
The status of the link between the port and the end node
connected to the port. Possible values are:
Up - indicates that a valid link exists between the port and the end
node.
Down - indicates that the port and the end node have not
established a valid link.
Neg
The status of Auto-Negotiation on the port. Possible values are:
Auto - Indicates that the port is using Auto-Negotiation to set
operating speed and duplex mode.
Manual - Indicates that the operating speed and duplex mode
have been set manually.
Allied Telesyn Ethernet Switch AT-8024
Login Session: Manager
Port Status
Prt Link Neg MDIO Spd Dplx PVID VlanID Flow State
---------------------------------------------------------------------
001 Up Auto MDI 10 Half 00001 00001 Disabled Forwarding
002 Up Auto MDI 100 Full 00001 00001 Disabled Forwarding
003 Up Auto MDI 100 Full 00001 00001 Disabled Forwarding
004 Up Auto MDI 100 Full 00001 00001 Disabled Forwarding
005 Up Auto MDI 10 Half 00001 00001 Disabled Forwarding
006 Up Auto MDI 100 Full 00001 00001 Disabled Forwarding
007 Up Auto MDI 100 Full 00001 00001 Disabled Forwarding
008 Up Auto MDI 10 Half 00001 00001 Disabled Forwarding
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?