User`s guide

AT-S39 User’s Guide
280
Configuring IGMP Snooping
To configure IGMP snooping from a web browser management session,
perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration menu, select System.
3. Select the IGMP tab.
The IGMP tab in Figure 94 is displayed.
Figure 94 IGMP Window - Configuration
4. Adjust the IGMP parameters as necessary.
The parameters are explained below:
Enable IGMP Snooping Status
Enables and disables IGMP snooping on the switch. A check in the
box indicates that IGMP is enabled.