User`s guide

AT-S24 Version 2.01 User’s Guide
59
Running Diagnostics
The Omega interface has an option for running diagnostic self-tests on
the switch. The program reports on the operating status of the following
switch components:
❑ Flash PROM
❑ RAM
❑ Serial interface
❑ Main power supply
❑ Redundant power supply, if installed
❑ System fans
❑ Operating temperature
The tests also display the following information:
❑ AT-S24 version number
❑ Switch MAC address
❑ Running time
Note
Running the diagnostic tests will not disrupt the network operations
of the switch.
To run the self-diagnostics program on the switch, perform the
following procedure:
1. From the Omega Main Menu, select Administration.
2. From the Administration menu, select Diagnostics.