User`s guide

Chapter 7: Port Parameter Commands
66
SHOW SWITCH PORT
Syntax
show switch port=port
Parameters
port Specifies the port whose parameter settings you
want to view. You can specify more than one port at
a time. You can specify the ports individually (e.g.,
2,3,5), as a range (e.g., 7-9), or both (e.g., 2,5,7-9). To
view all ports, do not specify a port.
Description
This command displays a ports operating parameters, such as speed
and duplex mode.
Examples
The following command displays the operating settings for Port 4:
show switch port=4
The following command displays the operating settings for all ports:
show switch port