User`s guide

Chapter 5: SNMP Community Strings and Trap Commands
50
DESTROY SNMP COMMUNITY
Syntax
destroy snmp community=community
Parameter
community Specifies the community string you want to delete
from the switch.
Description
This command deletes the Read or Write community string from the
switch. You must delete a community string prior to assigning a new
string. For example, to change the Read community string from its
default “public” to something else, you would first need to delete the
“public” community string using this command, and then create the
new string using the CREATE SNMP command.
Example
The following command deletes the community string “public”:
destroy snmp community=public