User`s guide

Chapter 3: Basic Switch Commands
36
RESET SYSTEM
Syntax
reset system [name] [contact] [location]
Parameters
name Deletes the name of the switch.
contact Deletes the name of the network administrator
responsible for managing the unit.
location Deletes the location of the switch.
Description
This command deletes the information listed above in Parameters.
Note
For instructions on how to set the name, contact and location of a
switch, refer to the SET SYSTEM command.
Examples
The following command deletes all three items:
reset system name contact location
The following command deletes just the location:
reset system location