User`s guide

AT-S39 Command Line Interface User’s Guide
35
SET SYSTEM
Syntax
set system [name=”name”] [contact=”contact”]
[location=”location”]
Parameters
The parameters are defined below:
name Specifies the name of the switch. The name can be from 1 to
15 alphanumeric characters in length and must be enclosed
in quotes (“ “).
contact Specifies the name of the network administrator
responsible for managing the switch. The contact can be
from 1 to 15 alphanumeric characters in length and must be
enclosed in quotes (“ “).
location Specifies the location of the switch. The location can be
from 1 to 15 alphanumeric characters in length and must be
enclosed in quotes (“ “).
Description
This command sets a switch’s name, the name of the network
administrator responsible for managing the unit, and the location of the
unit.
Example
The following command sets a switch’s information:
set system name=”Sales” contact=”Jane Smith”
location “Bldg 3, rm 212”
The following command sets just the system’s name:
set system name=”PR Office”