Manualshelf

User`s guide

ManualsBrandsAllied Telesyn International Corp ManualsComputer equipmentAT-8016F/MT
21222324252627282930
AT-S39 Command Line Interface User’s Guide
27
SHOW IP
Syntax
show ip interface=1
Parameters
interface Specifies the interface number. This value is always
“1”.
Description
This command displays the current values for the following switch
parameters:
❑ IP address
❑ Subnet mask
❑ Default gateway
Note
To set these parameters, refer to the SET IP and the SET IP ROUTE
commands.
Example
The following command displays the values of several switch
parameters:
show ip interface=1