User`s guide

Chapter 20: Download and Upload Commands
170
UPLOAD
Syntax
upload method=tftp|xmodem type=image|config
method Specifies the method of the upload. Only one option
is available:
tftp Indicates that the upload will be
performed using TFTP. To use this
option, you must have TFTP server
software on a network node.
xmodem Indicates that the upload will be
from the switch to the
management workstation.
type Specifies the file to be uploaded. Options are:
image Uploads both the AT-S39 software
image and bootloader.
config Uploads the switch’s
configuration file.
You can specify only one file at a time.
Description
This command is used to upload the AT-S39 software image and
bootloader from a switch to a management workstation. This command
can also be used to upload a switch’s configuration file to a
management workstation.
Before uploading files, note the following:
❑ This command can only be performed from a local management
session. This command is not available from a Telnet or web
browser management session.
❑ A configuration file cannot be edited with a text editor or word
processor.