User`s guide

Chapter 19: Statistics Commands
164
RESET SWITCH PORT COUNTER
Syntax
reset switch port=port|all counter
Parameters
port Specifies the port whose statistics counter you want to
return to zero. You can specify more than one port at a
time. The ports can be specified individually (e.g.,
1,2,5,8), as a range (e.g., 2-5), or both (e.g., 11-13,18).
To specify all ports, use ALL.
Description
This command returns the statistics counter for a port to zero.
Example
The following command returns the counters on Ports 4 and 5 to zero.
reset switch port=4,5 counter