User`s guide

AT-S39 Command Line Interface User’s Guide
125
DESTROY VLAN
Note
This command is only allowed in user-configured VLANs mode. If
you use this command when in multiple VLAN mode, you will
receive the following message:
Operation NOT allowed in Multiple VLANs mode
Syntax
destroy vlan=name|vid
Parameter
vlan Specifies the name or VID of the VLAN to be deleted.
Description
This command deletes a VLAN from a switch. All untagged ports in a
deleted VLAN are automatically returned to the Default_VLAN.
You cannot delete the Default_VLAN.
Examples
The following command deletes the VLAN Sales from the switch:
destroy vlan=sales
The following command deletes a VLAN with a VID of 2001 from the
switch:
destroy vlan=2001