Installation guide

AT-8000 Series Fast Ethernet Switches Installation Guide
61
Note
If removing a module, store the device in an antistatic bag or
immediately install it in another switch.
Figure 27 Removing the Expansion Slot Faceplate
5. Pull the faceplate straight out of the slot.
Keep the faceplate in a safe area in case you need to replace it on
the slot again. The faceplate will keep any dust from getting into
the switch and will maintain proper airflow if the slot remains
empty.
6. Carefully slide the module into the slot until the module faceplate
makes contact with the switch, as displayed in Figure 28. Avoid
touching the module components.
Figure 28 Installing a Module
26
1
3
5
2
4
6
25
26
1
3
5
2
4
6
25
10/100/1000BASE-T
AT-A46
10
100
FULL DUPLEX
ACTIVITY
LINK
1000