Installation guide

Product Description
34
Telnet Application Protocol
The Telnet application protocol offers another way for you to remotely
manage a switch from a workstation on your network. Starting this type
of remote access requires that you specify the IP address of the switch in
the Telnet protocol.
This method of managing the switch will work only after you have
assigned the switch an IP address and subnet mask or have
implemented the enhanced stacking feature.
SNMP Management
You can also remotely manage a switch with an SNMP management
program, such as HP Openview. This management method requires
loading the AT-8000 Series Fast Ethernet Switch MIBs onto the
workstation from where you intend to manage the switch and that you
compile the MIBs with a MIB complier.
The MIB standards supported by this switch include:
# RFC 1213 (MIB II)
# RFC 1215 (TRAP MIB)
# RFC 1493 (Bridge MIB)
# RFC 1643 (Ethernet MIB)
# RFC 1573 (Interface Group MIB)
# RFC 2674 (IEEE 802.1Q MIB)
# Allied Telesyn International (ATI) Enterprise MIB
Note
The MIBs for the AT-8000 Series Fast Ethernet Switches are available
from the Allied Telesyn web site.