Installation guide

Product Description

You can access the switch’s management software four ways:

# RS-232 Terminal Port

# Web Browser

# Telnet Application Protocol

# SNMP management program

RS-232 Terminal Port

One method for accessing the management software is by connecting a

terminal or a PC with a terminal emulation program to the RS-232

Terminal Port on the switch. This is commonly referred to as local or out-

of-band management. (Refer to Figure 13.)

Figure 12 Local Management

Once the session is established, the management software’s main menu

is displayed on the terminal’s screen, as shown in Figure 13.

Figure 13 AT-S39 Main Menu - Local Management Session

Link

Mode

Link

Mode

100

FULL

ACT

MODE

COL

FAULT

MASTER

PWR

AT-8024

10Base-T/ 100Base-TX Fast Ethernet Switch

RS-232 TERMINAL PORT

Allied Telesyn AT-8024GB Ethernet Switch

Main Menu

1 - Port Menu

2 - VLAN Menu

3 - Spanning Tree Menu

4 - Administration Menu

5 - System Config Menu

6 - MAC Address Tables

7 - Ethernet Statistics

8 - Diagnostics

9 - Enhanced Stacking

A - Command Line Interface

R - Previous Menu

Enter your selection: