Installation guide

AT-8000 Series Fast Ethernet Switches Installation Guide
29
RPS Connector Systems
# AT-8024M
# AT-8016F/SC
# AT-8016F/MT
Description
The RPS connector on the back panel of the switch connects to the
optional AT-RPS3004 redundant power supply unit, shown in Figure 11.
The unit can provide power to the switch in the event the switch’s
internal power supply should fail.
The AT-RPS3004 redundant external power supply comes with one pre-
installed AT-PWR3004 Power Module and has three empty slots for
additional power modules. Each power module can support one switch,
making the AT-RPS3004 unit capable of supporting up to four switches
simultaneously.
Figure 11 AT-RPS3004 Redundant Power Supply Unit