Installation guide

Product Description
20
If desired, Auto-Negotiation on one or all of the switch ports can be
disabled so that you can set the duplex mode manually through the
switch’s management software.
Maximum Distance - Each twisted pair port has a maximum operating
distance of 100 m (328 ft.).
Type of Cabling - For 10 Mbps operation, Category 3 or better 100 ohm
shielded or unshielded twisted pair cabling is required. For 100 Mbps
operation, Category 5 or Enhanced Category 5 (5E) 100 ohm shielded or
unshielded twisted pair cabling is required.
Auto-MDI - The ports are auto-MDI. They automatically configure
themselves as either MDI or MDI-X. This feature allows you to use either
straight-through or crossover twisted pair cables to connect devices to
the ports.