Specifications

Getting Started
32
If you need multiple ELANs, or do not use the default ELAN, you
must define an ELAN name and associate it with a number. To define
your ELAN, access the Emulated LAN Definition option within
the Main Menu. Choose the number and the name you wish to use.
3. Decide which ports (or MAC addresses) will be assigned to which ELANs.
Access the Port to ELAN Configuration submenu within the
LAN Emulation Menu to set the ELANs you would like to be
enabled on each port. By default all ports belong to ELAN 1 which is
named the “Default ELAN”.
4. Define your PVCs (up to 128 PVCs can be configured). Access the PVC
Definitions submenu within the LAN Emulation Menu.
VCI — Virtual Circuit Identifier. While you can use Virtual Circuit
Identifiers between 1 and 1,024, VCIs between 1 and 31 have been
reserved for ATM management cell purposes and are not available for
use. Further, the VCI number must be the same on each of the
switches which make up the point-to-point connection.
ATM Address — This is the ATM address of the device this PVC is
going to connect to.
VPI — Virtual Path Identifier. Accessed within the ATM
Parameters submenu within the System Administration
Menu, it must be 0 in this release.
ELAN Number — Pick the correct number of the ELAN you want
this PVC to be a member of, or use the default (Default ELAN).
The above processes can be shown in the following screens:
1. Enter
PV for PVC definitions from the LAN Emulation Menu.