Installation manual

AT-4016F Installation Manual
5
Figure 5 shows a close-up of the ATM Media Module faceplate using an
SC connector.
Without a media module installed, or installed but not used, the AT-4016F
operates as a standalone Ethernet switch.
When ordered factory-installed, the media module version is indicated by
the third digit in the model name suffix. You can also order additional
ATM Physical Media Modules separately for different media
requirements.
Table 2 shows the suffixes and separate model numbers for ATM Media
Modules.
Table 2: ATM Media Modules
1. Available 2Q96
2. Available 3Q96
Figure 5: ATM Faceplate
AT-4016F
Model Suffix
Media
Module
Model
Description
0 — ATM slot (i.e., the AT-4016F acts as an Ethernet switch
without ATM connectivity)
2 AT-4002 155 Mbps OC-3c/STM-1 multimode optical media
module
3 AT-4003
1
155 Mbps OC-3c/STM-1 twisted pair media module
5 AT-4005
2
155 Mbps OC-3c/STM-1 single mode optical media
module