Installation guide

14
Reviewing Safety Precautions
Please review the following safety precautions before you install the media
converter.
Warning
Class 1 laser product.
!
6
Warning
Do not stare into the laser beam.
!
7
Warning
Electric Shock Hazard
: To prevent electric shock, do not remove the
cover. There are no user-serviceable parts inside. The unit contains
hazardous voltages and should only be opened by a trained and
qualified technician. To avoid the possibility of ELECTRIC SHOCK,
disconnect electric power to the product before connecting or
disconnecting the LAN cables.
!
8
Warning
Lightning Danger
: Do not work on equipment or cables during periods
of lightening activity.
!
9
Warning
Power cord is used as a disconnection device:
To de-energize
equipment, disconnect the power cord.
!
10
Warning
Electrical-Type Class 1 Equipment
: This equipment must be
earthed. The power plug must be connected to a properly wired earth
ground socket outlet. An improperly wired socket outlet could place
hazardous voltages on accessible metal parts.
!
11
Caution
Pluggable Equipment
: The socket outlet shall be installed near the
equipment and shall be easily accessible.
!
12
Caution
Air vents
: The air vents must not be blocked on the unit and must have
free access to the room ambient air for cooling.
!
13