Specifications

37
Chapter 5
AT-TS24TRS
The AT-TS24TRS is a multiport hub designed to offer maximum flexibility
for both workgroup and department needs. Specifically, the AT-TS24TRS
has 24 shielded RJ45 connectors for UTP cable. Since the AT-TS24TRS
model does not incorporate management agent software, it can operate
only as part of a non-managed hub or as a Slave module in an ATI
department concentrator chassis.
Note
This manual refers to two or more chassis-mounted hubs, at least one of
which is manageable, as a department concentrator. The term hub refers to
either a standalone hub (i.e., a single manageable hub) or a department
concentrator configuration.
The AT-TS24TRS is based on as Application-Specific Integrated Circuit
(ASIC) ATI developed for maximum functionality and reliability.
Figure 27 shows the faceplate of the AT-TS24TRS model hub.
Figure 27: AT-TS24TRS
Faceplate
Hub status LEDs
RJ45 connectors
Hub doors/handles
Power receptacle
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com