Specifications

AT-TS12FS/ST, SC, SM
28
Attention
The ST connector is keyed. Gently rotate the connector to ensure proper
mating of the ST plug receptacle. Be careful not to force the connector
mating or you might damage the hub’s connector.
Figure 18 shows the square push-pull SC connector. Also shown is the
optional duplexing clip.
Attention
The SC connector may be installed with an optional duplexing clip, as
shown in Figure 19 above. This clip helps prevent confusion between the
transmit/receive (TX/RX) left-right sequence when an SC connector is
plugged into an SC plug receptacle.
Figure 19 shows the threaded SM connectors.
Note
References in this manual to SMA and SM are interchangeable, both being
acronyms for Sub Miniature Assembly.
Figure 18: SC Connector for
Fiber Optic Cabling
Duplexing
Clip
Figure 19: SM Connector for
Fiber Optic Cabling
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com