Specifications

TurboStack Series Hubs
19
TurboStack Port Configurations
AUI Port TurboStack hubs without management have a fixed AUI port, located on
the front panels of the AT-TS12FS/ST, SC, SM models and on the back
panels of the AT-TS24TRS and AT-TS24TS models. Figure 11 shows the
front panel location of this port on the AT-TS12FS/SC module.
Note
The permanent AUI port is located on the back panels of the AT-TS24TRS
and AT-TS24TS models.
You can use the AUI port to connect the hub to the network in a
standalone configuration. In a managed hub, the Master module’s front
panel AUI port can be used for the network connection. In a non-managed
hub configuration, if you are using a two- or three-slot chassis, one
module’s AUI port can be used for the network connection and the
remaining AUI port(s) may be used for station connections.
Micro Transceivers Different media connections can be accommodated through the use of an
ATI micro transceiver.
Table 3 shows the ATI micro transceivers available for network connections.
Table 3: ATI Micro Transceiver Choices
Figure 11: AT-TS12FS/SC AUI
Port
Permanent AUI port
Model Description
AT-MX10/AT-MX10S AUI to 10BASE2 (Thin) Ethernet
AT-MX40F/ST AUI to Fiber Optic (10BASE-FL), ST Connector
AT-MX50F/SM AUI to Fiber Optic (10BASE-FL), SMA Connector
AT-MX55F/SC AUI to Fiber Optic (10BASE-FL), SC Connector
AT-210T/AT-210TS/AT-MX20T AUI to UTP (10BASE-T)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com