Specifications

TurboStack Series Hubs
9
Slave
Module
Slave modules (AT-TS12FS/ST, SC, SM; AT-TS24TRS; and AT-TS24TS)
may occupy any other higher-numbered slot position in the chassis except
Slot 7 (the bottom slot). They do not need to be adjacent or contiguous. In
other words, Slave units may be separated by empty chassis slots.
TurboStack Department Concentrator
Figure 6 shows a sample TurboStack department concentrator using the
7-slot chassis model. You can configure up to six TurboStack hubs in these
rackmount models.
In the seven-slot department concentrator shown in Figure 6, up to 90
ports can be monitored:
❑ One Master containing eight 10BASE2 station ports
❑ Two hubs with management containing a total of twelve (RJ21)
10BASE-T station ports, twenty-four (RJ45) station ports, and two
AUI ports
❑ Two hubs with management containing a total of six (SC) 10BASE-FL
station ports, twelve (ST) 10BASE-FL station ports, and two AUI
ports
❑ One Slave hub containing twenty-four RJ45 station ports for UTP
(The AUI port is not available because of its backplane location)
Figure 6: Populated 7-Slot
Chassis with
Segmented
Backplane
Master
module
Backup
AT-TS90TR
(slot 7)
(slot 1)
module
Slave
module
(slot 2)
(slot 6)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com