Specifications

Overview
4
Hub Features Table 1 summarizes the physical features of the AT-TS12FS/ST, SC, SM;
AT-TS24TRS; and AT-TS24TS hubs without management. Specifically,
this table identifies the model number, port count, and media/connector
type for each Slave device.
Table 1: Features of TurboStack Hubs without Management
Note
The permanent AUI ports on the back panels of the AT-TS24TS and
AT-TS24TRS model hubs are not available for use in chassis
configurations.
Each manageable TurboStack Slave hub provides the following standard
features, regardless of media type or number of ports:
Internal universal power supply
IEEE 802.3 compliance; Ethernet Version 1.0 and 2.0 compatible
repeater functionality
Placement options include standalone, 19-inch rack mount or
chassis mount
Three types of network management capability (when used in a
chassis with a management unit):
— SNMP
— Via ASYNC ASCII terminal port (Omega)
— Telnet (Omega)
Hot swapping of modules in chassis
Comprehensive diagnostic LED support
Storage of up to 300 MAC addresses per hub
Updates to the MAC address table are effected dynamically in
Learning Mode or manually by the user
Inventory control through storage of multiple addresses on MAC
address table
Security features to handle intrusions
Fixed (i.e., permanent) AUI port
Model Number Port Count Media/Connector Type AUI Port Location
AT-TS12FS/SM 12 Fiber Optic(10BASE-FL) with Sub
Miniature Assembly (SMA) Connectors
Front Panel
AT-TS12FS/SC 12 Fiber Optic(10BASE-FL) with Subscriber
Channel (SC) Connectors
Front Panel
AT-TS12FS/ST 12 Fiber Optic(10BASE-FL) with Straight
Tip (ST) Connectors
Front Panel
AT-TS24TS 24 Two 50-Pin (Telco Connectors) Back Panel
AT-TS24TRS 24 24 (RJ45 Connectors) Back Panel
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com