Specifications

TurboStack Series Hubs
3
The AT-TS24TS and AT-TS24TRS model hubs differ from the AT-TS12FS/
SM, SC, and ST hub models primarily because each AT-TS12FS series
model has 12 paired fiber optic (10BASE-FL) ports on the front panel of
the unit. Also, unlike the AT-TS24TS and AT-TS24TRS model hubs, the
AUI backbone port is mounted on the front panel of AT-TS12FS/ST, SC,
and SM hubs.
Figure 2 shows the AT-TS24TS faceplate with two 50-pin Telco data port
connectors.
The primary physical difference between the AT-TS24TS and AT-TS24TRS
modules is that the AT-TS24TS uses two 50-pin Telco connectors while the
AT-TS24TRS uses 24 RJ45 connectors. However, you can connect an
AT-ADAPT-2 harmonica or an octopus cable to the AT-TS24Ts, enabling
you to use RJ45 connectors.
Figure 3 shows the AT-TS24TRS faceplate with 24 RJ45 data port
connectors for UTP.
Figure 2: AT-TS24TS
Faceplate
Telco connectors
Power
receptacle
Port activity LEDs
Hub status LEDs
Figure 3: AT-TS24TRS
Faceplate
24 RJ45
connectors
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com