Specifications

Overview
2
Note
For a detailed explanation of ATI’s TurboStack chassis/backplane
offerings, refer to the TurboStack™ Chassis and Backplanes Installation
Manual. This manual describes the physical features and installation
procedures for the chassis models. See your ATI sales representative for
further details.
Data Port
Connectors
TurboStack hubs are based on ATI’s proprietary Application-Specific
Integrated Circuit (ASIC) developed for maximum functionality and
reliability. The AT-TS12FS/ST, SC, SM; AT-TS24TRS; and AT-TS24TS
hubs have multiple ports, each with different connectors to provide
flexibility.
Each AT-TS12FS series model has 12 fiber optic (10BASE-FL) ports and is
available with a choice of port connectors as follows:
❑ The ST (Straight Tip) model, which has attachment points with
two pins to connect bayonet-style
❑ The SC (Subscriber Channel) model, which has a square push-pull
mating interface
❑ The SMA (Sub Miniature Assembly) model, which has a threaded
attachment
Note
References in this manual to SMA and SM are interchangeable, both being
acronyms for Sub Miniature Assembly.
Figure 1 shows the faceplate of the AT-TS12FS/SC model with 12 SC data
port connectors.
Figure 1: AT-TS12FS/SC
Faceplate
12 SC connectors
Port activity LEDs
AUI port
Hub status LEDs
Power
receptacle
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com