Installation manual

AT-2560FX 100 and AT-2560TX 10/100 PCI

1. Make sure

the computer’s power is turned OFF.

2. Take the cover off the computer, and locate a PCI

busmaster adapter slot. In most computers, all slots are

busmaster enabled, but some are not. If you have

configuration problems, see your computer’s

documentation to determine if your PCI slots are

busmaster enabled.

3. Remove the cover bracket from the slot.

4. Push the adapter into the slot until the

adapter is seated firmly. Then secure the

adapter bracket with a screw.

5. Replace the computer cover and plug in the

power cord.

Figure 1:

PCI Slot

PCI slot