Installation manual

AT-2560TX 10/100 PCI Troubleshooting

AT-2560TX 10/100 PCI

Troubleshooting

If the AT-2560TX 10/100 PCI can’t connect to the network

❑ Make sure the cable is installed properly

The network cable must be securely attached at all connec-

tions. If the cable is attached but the problem persists, try a

different cable.

If you’re operating at 100 Mbps, you must use TPE Catego-

ry 5 wiring (certified to 100 Mbps). See the help file section

called Hardware specifications and cabling information for a

list of recommended cables and information on how to install

the cabling properly.

If you’re directly connecting two workstations (no hub), use

a cross-over cable. See the help file section called Hardware

specifications and cabling information for information on

cross-over cables.

❑ Check the LED lights on the adapter

The adapter stopped working

without apparent cause.

Try reseating the adapter or try a

different slot.

The network driver files may be corrupt

or deleted. Reinstall the drivers.

Try a different AT-2560FX 100 PCI.

Table 6: Common AT-2560FX 100 PCI problems and solutions (Continued)

Problem Solutions