Installation manual

AT-2560FX 100 and AT-2560TX 10/100 PCI

Windows NT Using the A2560SET program:

1. Click the Network icon in the Control

Panel.

2. Click the Configure button. The

A2560SET program runs.

3. Click the Change button. Set Speed to

100 (or 10).

4. Click the Advanced button. Set Duplex

Mode to Full, exit A2560SET and restart

Windows.

Windows 95 Setting the Speed and Duplex mode in

the Control Panel:

1. Click the Network icon in the Control

Panel and select the Configuration tab.

2. Select the Allied Telesyn AT-2560TX

10/100 PCI.

3. Click the Properties button and select

the Advanced tab.

4. Set Speed to 100 Mbps (or 10 for 10

Mbps operation).

5. Set Duplex Mode to Full, exit

A2560SET and restart Windows.

Others network software See the Duplex support README file.

To view the README files, insert the

Allied Telesyn CardAssistant diskette,

and from the DOS-prompt type

SETUP /README

Table 5: Steps for Setting AT-2560TX 10/100 PCI Duplex Mode (Continued)

If you’re using this driver. . . set the duplex mode by. . .

ENTER