Installation manual

Configure drivers

4. Insert the CardAssistant diskette into your floppy disk

drive and then type A:\ in the Insert Disk dialog box.

(Substitute the drive letter of the floppy drive if

necessary.) Click OK.

5. Verify that "ATI AT2560FX PCI Ethernet Adapter"

appears in the Select OEM Option dialog box. Then click

OK.

6. The A2560SET program automatically scans computer

resources and determines the settings assigned to your

adapter. It also adds an icon to the Control Panel for future

use of A2560SET.

NT 3.x—install network drivers.

After putting the adapter in the

computer and starting Windows NT, you need to install the

drivers and test the adapter.

1. Double-click the Network icon in the Control Panel.

2. Click the Add Adapter button.

Don’t select an Allied Telesyn adapter from the

list.

Instead, scroll to the end of the list and select:

<Other> Requires disk from manufacturer.

4. Insert the Allied Telesyn CardAssistant disk in a floppy

drive and click OK. Drivers and the Allied Telesyn

A2560SET utility are installed and A2560SET starts.

A2560SET automatically scans computer resources and

determines what resources were assigned to the adapter.

Test the adapter.

It is a good idea to run diagnostics any time you

add an adapter.

A2560SET is an enhanced utility that you can use to easily

configure and test your adapter in Windows NT.

1. Click Test.

If you’ve just added the adapter, the network driver is not

active and the diagnostics will test the adapter and its con-

nection to the network.