Installation manual

Attach the cable to the media port

Connect the transmit receptacle at one end of the segment to the

receive receptacle at the other end and vice versa. Be sure to

align the key on the cable connector with the keyway on the

adapter card receptacle when attaching the cable. Especially

with the ST-type connectors, forcing cable insertion can cause

receptacle or connector damage.

AT-2560TX 10/100 PCI

The AT-2560TX 10/100 PCI provides a RJ45 UTP connector for

10BASE-T and 100BASE-TX Fast Ethernet. Figure 4 shows the

UTP connector.

NOTE

Always use Category 5 (CAT5) cabling when operating at 100

Mbps. Use Category 3, 4, or 5 at 10 Mbps.

Figure 4:

RJ45 Connector

LNK

ACT

100