Specifications

Hardware Reference 5
C613-03086-00 REV A
Where To Find More Information
The Documentation and Tools CD-ROM bundled with each router contains the
complete Document Set for your router and, where applicable, its expansion
options. The CD-ROM also includes tools for managing your router.
The Document Set includes:
■ The Safety Booklet for your router, which provides safety and statutory
information.
■ The Quick Install Guide for your router, which outlines how to install the
router.
■ The User Guide for your router, which describes basic configuration
procedures.
■ The AR400 Series Router Hardware Reference, which provides detailed
information on the hardware features of AR400 Series routers.
■ The AR400 Series Software Reference, which provides detailed information
on configuring the router and its software.
■ The Port Interface Card Quick Install Guide, which outlines the procedure for
installing PICs.
■ Port Interface Card Hardware Reference, which provides detailed information
on PICs.
These documents can also be downloaded from the Support Site at
www.alliedtelesyn.co.nz/support/ar400/.
AR410 and AR410S Routers
AR410 and AR410S routers consist of a base CPU card, enclosure, and power
supply. The base CPU card supports:
■ Four 10/100 Ethernet switch ports.
■ One 10/100 Eth 0 port.
■ One asynchronous RS-232 (ASYN 0) configuration port.
■ One Port Interface Card (PIC) bay.
■ One internal MAC slot (an AT-AR011V2 MAC card is factory fitted in the
AR410S router).
The PIC bay can accommodate any of the following PICs:
• AT-AR020 PRI E1/T1 PIC, one Primary Rate E1/T1 port.
• AT-AR021(S) BRI-S/T PIC, one Basic Rate ISDN S/T port.
• AT-AR021(U) BRI-U PIC, one Basic Rate ISDN U port.
• AT-AR022 ETH PIC, one Ethernet LAN AUI/10BASE-T port.
• AT-AR023 SYN PIC, one Synchronous port with universal 50-way
AMPLIMITE connector.
• AT-AR024 ASYN4 PIC, four Asynchronous ports with RJ-45
connectors.