Specifications
Table Of Contents
- AR400 Series Router Hardware Reference
- Contents
- Introduction
- Models Covered By This Reference
- Where To Find More Information
- AR410 and AR410S Routers
- AR440S and AR441S ADSL Routers
- AR450S Router
- Rack and Wall Mounting
- Online Documentation
- AT-TFTP Server
- Using Windows HyperTerminal
- Router Start-Up
- Flash Memory
- RS-232 Terminal Ports (ASYN)
- Cables and Loopback Plugs
- Test Facility
- Expansion Options
- Restricted Procedures
- Contacting Us
22 AR400 Series Router
C613-03086-00 REV A
6. Click “ASCII Setup” to display the ASCII Setup dialog box. Uncheck:
• “Echo typed characters locally”.
• “Append line feeds to incoming line ends”.
Set other parameters as required.
• Click “OK” twice to close all dialog boxes.
7. Save the current session. From the File menu, select:
•“Save”.
This creates a connection icon with the name you assigned in the
HyperTerminal group. To use the configuration:
• Double-click the connection icon in the HyperTerminal group.
When the HyperTerminal window is displayed, press:
• [Enter] a couple of times.
The router’s login prompt is displayed.