Specifications
Table Of Contents
- AR400 Series Router Hardware Reference
- Contents
- Introduction
- Models Covered By This Reference
- Where To Find More Information
- AR410 and AR410S Routers
- AR440S and AR441S ADSL Routers
- AR450S Router
- Rack and Wall Mounting
- Online Documentation
- AT-TFTP Server
- Using Windows HyperTerminal
- Router Start-Up
- Flash Memory
- RS-232 Terminal Ports (ASYN)
- Cables and Loopback Plugs
- Test Facility
- Expansion Options
- Restricted Procedures
- Contacting Us

Hardware Reference 17
C613-03086-00 REV A
2. Screw the brackets to the router.
Screw a wall mount bracket to the outer screw holes on each side of the
router using the shorter M3 screws supplied (see figure below).
Figure 1-5: Connecting the wall mount bracket to the router.
Screw the wall brackets to the wall with the brackets at the top and bottom
and the feet against the wall.