Specifications

Hardware Reference 15
C613-03086-00 REV A
LEDs and what they mean
Power supply
The router has a universal AC input connector and a power switch on its rear
panel. The router requires a power input of 100-240 VAC and 50–60Hz.
Rack and Wall Mounting
You can mount any AR400 Series router in a 19 inch rack, using a rack mount
bracket kit that may be supplied with the router or ordered in addition to the
router, depending on the model. You can mount AR440S and AR441S routers
on a firm wall.
To install the router in a rack
1. Gather additional items you will need.
To install the router in a rack you will need a rack mount bracket kit.For
AR440S and AR441S routers the rack mount bracket kit is C814-44000-00.
Order these from your authorised Allied Telesyn distributor or reseller.)
You will also need a Phillips #1 screwdriver, and screws and cage nuts to
attach the brackets to your rack.
If you are also installing an optional Port Interface Card (PIC), you need a
PIC Quick Install Guide.
Table 1-4: AR450S LEDs
LED State Function
Power Green The router is receiving power and the power
switch is in the ON position
System Amber Lit briefly during router start up, or the router
is malfunctioning.
Amber flashing The router fan has failed.
Off Normal operation
Full
Green The corresponding port is operating at full-
duplex
Off The corresponding port is operating at half-
duplex
Link/ACT
Green A link has been established through the
corresponding port
Flashing Data is being transmitted through the
corresponding port
Off No link is present through the corresponding
port
100M
Green The corresponding port is operating at
100Mbps
Off The corresponding port is operating at 10Mbps