User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
Configuring for a Leased Line 6-5
4. Your ISDN connection has two channels, B1 and B2, that can be used for one
or two connections, and a D channel used for signalling. The ISDN Leased
Line page (Figure 6-3) allows you to choose the B channels the router will
use to connect to your ISP. If you are unsure, contact your ISDN service
provider.
Figure 6-3: ISDN Leased Line page
■
Select the B channel(s) for your ISDN leased line connection. Click Next.
If you have an AR140 router with phone ports, the Phone Setup page (Fig-
ure 6-4) opens. Continue at step 5 on page 6-6.
If you have an AR130 router without phone ports, the Internet Connection
page for ISDN Leased Line (Figure 6-5) opens. Go to step 6 on page 6-7.