User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
Configuring for a Leased Line 6-3
Internet leased line connection
1. Print out the following configuration checklist, and gather the information
required.
Table 6-1: Check list for Internet connection, ISDN Leased Line
2. On the Welcome page for the AR100 Configuration Wizard (Figure 6-1),
click the Show me ISDN leased line connection options link.
Configuration Parameter Examples Enter your data below
Your ISDN provider connects you to your ISP with a leased line on one or two B channels,
B1 and B2. Your ISDN provider will supply this information.
B channels used for leased
line to ISP
Leased line to ISP
on B1 & B2
If you have an AR140 with phone ports, your ISDN provider may have supplied you with
one or two ISDN numbers that external callers will use to ring the phone extensions.
Determine whether you want a call to one of the phones to ring both phones, or only that
phone.
Local ISDN number for
Phone 1
35676767
Local ISDN number for
Phone 2
356767
Each number rings one or
both phones?
RIng only the phone
on the port for the
number called
You need the IP address of your Internet Service Provider (ISP).
IP address
123.23.4.1