User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
5-14 Inter-office dial-on-demand connection
■
Put a bookmark in your web browser at this page so that you can easily
reach it in the future.
Note: You have gained access to the router to configure it by using the factory
default password for the router’s manager account. To limit unauthorised ac-
cess to the router and its configuration, we recommend that you change this
password as soon as you have configured the router for the first time. Go to
“Changing system information” on page 7-2 of Chapter 7, Changing Your Configura-
tion
7. The Test Results page shows a summary of which tests have been per-
formed and the results. It takes a few seconds for all the tests to be run. It
takes a few seconds for all the tests to be run.
Figure 5-11: Test Results page
■
If all the tests succeeded, click OK to return to the Configuration Sum-
mary page.
■
If any tests failed, note the test results (for instance, by printing out the
Test Results page) and see “Connection test fails” on page 10-13. Click
OK to return to the Configuration Summary page.