User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
3-28 Connecting additional PCs
8. Click the Gateway tab.
Figure 3-34: Gateway tab
Enter the gateway address from field H in Table 3-1. Click OK to save your
changes and close the TCP/IP Properties dialog. Click OK to close the Net-
work dialog. Restart your PC when prompted to put the configuration
changes into effect.
Changing from dial-up networking
If you have been using Windows dial-up networking for your connections to
the Internet or a remote office previously, you may need to change the connec-
tion parameters so that your PC will use the router for your remote connec-
tions.
9. In the Control Panel, double click on the Internet, Internet Connections or
Internet Options icon to open the Internet Properties dialog. Click on the
Connections tab.
Windows 95: If you have a check box labelled Connect to the Internet as
needed, UNCHECK it.
If you do not have this check box, but you do have an option to Connect to
the Internet using a local area network, CHECK this instead.
Windows 98 or 2000: Select Never dial a connection.
Click OK to save your changes and close the Internet Properties dialog.
Click the Close button in the Control Panel title bar to close the Control
Panel.