User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
Getting Connected 3-27
Figure 3-33: DNS Configuration tab
Select Enable DNS. Enter the DNS host name for the additional PC from
fields J, K and L in Table 3-1. Enter the DNS Server Search Order from field
G in Table 3-1.
If field A in Table 3-1 shows the IP addresses are obtained automatically,
click OK to save your changes and close the TCP/IP Properties dialog box.
Click OK to close the Network dialog box. Restart your PC when prompted
to put the configuration changes into effect. Go to step 9 on page 3-28 to
check your Internet connection properties.
If field B in Table 3-1 shows Specify an IP address, continue at step 8 on
page 3-28 to enter the gateway address.